Do Subwoofer Cables Make A Difference?

Can I use a coaxial cable for a subwoofer?

Yes.

You can use the Coax digital cable for a subwoofer connection without problem.

However, things may not be entirely interchangeable.

Digital coax cables and all video cables have a standard impedance of 75 ohms..

What cable do I need to connect subwoofer to receiver?

If the subwoofer’s ‘Line In’ uses RCA cables (and if the subwoofer out on the receiver/amplifier also uses RCA), simply plug-in using an RCA cable. If the cable is split on one end (a y-cable for both right and left channels), then plug in both the R and L ports on the subwoofer.

Are expensive subwoofers worth it?

More expensive subs aren’t just all about bigger and louder, although frequently they are. They are also about having more refinement and greater accuracy. In a smaller room that you don’t intend to play loud I personally think you’d be far better served with a sealed subwoofer.

Can I use speaker cable for subwoofer?

If you are using your subwoofer with a stereo receiver that lacks a subwoofer output (and many of them do), you can connect the subwoofer using an extra set of speaker cables, as shown above—provided the subwoofer has speaker-level (speaker wire) connections, as the picks in our Best Budget Subwoofer guide do.

Can you wire a subwoofer to the both right and left channels?

Many people tried this by connecting the left and right channels together and then connecting them to the single speaker. … Both of the channels will fight each other. Your amplifier may get hot and cause damage. So it is not possible to connect both the channels together in this way.

Do I need 2 subwoofer cables?

How to connect your subwoofer to your receiver. All powered subwoofers require two connections: power and signal. For power, you just need a nearby outlet. … For the signal, use a subwoofer cable to connect your receiver’s subwoofer output to the LFE (low frequency effect) input on the sub.

Does a subwoofer really make a difference?

A great subwoofer helps take away the heavy lifting from your loudspeakers, improving your overall system. The dynamics are more compelling, the soundstage widens, and the stereo imaging becomes more accurate.

Why does a subwoofer have a left and right input?

Since the subwoofer is responsible for low bass tones (aka its sole purpose), it requires a transmitter of low-frequency audio waves. The left and right channels are combined in an LFE cable to allow for a singular cable to evenly disperse the signals to the subwoofer.

Do I really need a subwoofer for my car?

If you love music and in your car a lot then you definitely should get a subwoofer, as it makes all music sound better. You don’t even need a big or huge subwoofer to notice the better music.

What cables do I need for a subwoofer?

Regardless of what type of connection is available, be it RCA or direct wired, it is highly recommended to use shielded, heavy gauge cabling specifically designed for subwoofers. Such cables provide a cleaner, more noise-free audio signal. The image below shows two subwoofer outputs.

Does it matter where the subwoofer goes?

For the best sound quality, the subwoofer should be placed with the speaker facing out to the room, and the port should be away from a wall. Bass waves travel in all directions, but it’s important to have the speaker facing your main listening area.

What phase should I set my subwoofer?

A: Depending on the absolute phase of your main speakers and amplifier and the distances of the subwoofer and the main speakers from the listening position, the bass in the crossover region may be smoother if you reverse the subwoofer’s phase. Typically, though, phase is left at 0° for most applications.

Do I need expensive subwoofer cable?

An expensive cable might sound worse on your system than cheap cable. Or it might sound better. The important thing to remember is that even if it does sound better, it’s such a minuscule improvement that pretty much anything else you can do will have a greater effect on the sound.

Does a subwoofer need power?

A subwoofer (sub) is speaker, that is dedicated to the reproduction of low-pitched audio frequencies most commonly referred to as bass. Passive Sub: Passive subs are called passive because they need to be powered by an external amplifier or Audio/Video (A/V) receiver . This is similar to traditional speakers.

What Hz is best for bass?

20-120 HzA 20-120 Hz rating is best for bass in most subwoofers. The lower the Hz, the more is the bass you can get. Some of the best subwoofers in the market have this Hz range. If you are buying a subwoofer that has a fixed Hz rating, you should ensure it is lower than 80 Hz if the bass is important to you.

Does a subwoofer need a special cable?

Subwoofers do not require any specific form of audio cabling. The specific type of cable needed to connect a subwoofer to an audio system will depend on the audio input jacks built onto the subwoofer itself.

Can I leave my subwoofer on all the time?

It’s fine to leave in on all the time with respect to the lifespan of the product, but keep in mind the amp may be drawing 30 to 50 watts then. I have a Polk sub that even on standby it draws 30 watts. With 30 watts of consumption at 12 cents per kilowatt hour, it will cost you $31 a year to leave that on 24/7/365.

Where do you place a subwoofer?

A subwoofer placed in the corner of a room may increase the subwoofer’s output – causing the sub to sound louder. Try placing your subwoofer in a corner and see how it sounds. However, depending on your floor space, a corner might not be a viable option for your subwoofer if it’s too far from your listening area.

Does length of subwoofer cable matter?

The length of the cables makes no difference for speakers or subwoofers. … The short version is electrical signals travel too fast through cables to make an audible difference, but the distance from the speakers and subs to your ears might make a difference if they are too widely spaced.

Why do subwoofers have 2 inputs?

Dual input allows the subwoofer an extra sensitivity adjustment. Normally, it would be enough to use a mono LFE subwoofer signal from its processor. If you have a processor with very low output so you can use a Y-splitter. By using both inputs with the same mono signal doubles the subwoofer sensitivity.

Where should you place a wireless subwoofer?

Typically, you position a subwoofer along the front wall of the room. Moving all of the bass sounds to the subwoofer gives your front speakers the ability to focus on mid- and high-range frequencies. (The subwoofer can handle all the low-frequency bass sounds in a home theater.)