How Long Can A Speakon Cable Be?

Do expensive cables make a difference?

Short answer, no.

Even expensive cables/interconnects can make no difference.

It’s good to read stuff, but with cables, etc.

it’s best to identify what aspects of sound are important to you and what you’d like to improve in your system and use that to choose some cables to try and see nothing happen..

Can speaker wire cause fire?

When dealing with electricity the potential for fire always exists. With speaker wire the threat level is very low, as the voltages involved are low, while amplifiers usually have protection circuits that will shut the amp down in the event of a short circuit.

Does length of subwoofer cable matter?

The length of the cables makes no difference for speakers or subwoofers. … The short version is electrical signals travel too fast through cables to make an audible difference, but the distance from the speakers and subs to your ears might make a difference if they are too widely spaced.

How far can a HDMI cable go?

50 feetLike many audio, video, and data cables, HDMI cords can suffer from signal degradation at longer lengths—50 feet is generally considered the maximum reliable length. And it’s rare to see an HDMI cable longer than 25 feet in a store. Even online, cables more than 50 feet long can be hard to find.

How many hours break in speaker cables?

In general, portable cables take approximately 80 hours to break in if they are silver or 40 hours if they are copper. In general, digital cables take approximately 80 hours to break in if they are silver or 40 hours if they are copper.

What happens if speaker wires are reversed?

No, the speaker won’t suffer any damage. In a stereo configuration, reversing polarity of one speaker and not doing it to the other channel will give you a very thin sound; you’ll notice an obvious lack of bass due to the acoustic cancellation of low frequencies. You may detect anomalies in the midrange as well.

What happens if speaker wires touch?

Usually the result of speaker wires touching (shorting out) is a dead amp channel. Though if say the right channel + touched the left channel – it might do nothing. Or blow up the amp.

Is thicker speaker wire better?

Thicker wires are better: It’s true that for long runs, thicker wires are better at reducing the effects of resistance. But for most set ups (those with speakers within 100 ft of the amplifier), 16-gauge lamp cord is fine. For speakers 100 to 200 ft. … And from 200 to 400 ft., they recommend 12-gauge wires.

How do I know if my speaker wires are bad?

Check the connection of the speaker wire for each speaker by gently tugging on the wire where it connects to the terminals on both the speaker and the receiver. If you have poorly connected the speaker wire, you will notice that the wire will come loose from the terminal easily.

Can I use regular electrical wire for speakers?

So, can I use an electrical wire as a speaker cable? To answer the question posed at the start of this article – yes, you can use a regular electric wire as a speaker cable, as long as it comes with two same-sized conductor wires.

How do you know when a speaker is bad?

Oh, you’ll know. The most common aural indication of a blown speaker is an unpleasant buzzing or scratching sound, by itself or roughly at the pitch of the note the speaker is attempting to reproduce. Or there could be no sound at all.

What is the maximum length of speaker cable?

High-power in-car audio systems using 2-ohm speaker circuits require thicker wire than 4 to 8-ohm home audio applications. While in theory heavier wire can have longer runs, recommended household audio lengths should not exceed 50 feet (15 m).

Does length of audio cable affect quality?

When long runs (of either interconnects or speaker cables) are used, cable quality becomes extra important. Due to the additional signal losses longer runs impose, the better the cable is at “protecting” the signal, the better will be the sound.

Do speaker cables matter?

Cables make a difference, but it’s a smaller difference than upgrading speakers, electronics, or turntable systems. If you already have a really good system, cables are the next logical upgrade step. The Cable Company also has a headphone lending library, for headphones that sell for more than $600.

Does speaker cable length make a difference?

The shorter the wire is, the less resistance it will have. … The thicker a wire or the lower the gauge, the less resistance. It is therefore a combination between speaker impedance, length and gauge that affects the resistance.

Do long RCA cables degrade sound?

Unbalanced leads (standard RCA’s) do have a finite length limit. You may be able to get away with long leads with high level signals. Any cartridge will not sound its best with long TT leads.

Are speaker wires dangerous?

As long as the huge currents stay within the wires and the speaker voice coil, it poses no danger to humans. Since the voice coils are much lower impedance than humans, the current will stay there, electrons tend to want to stick to the path of lower resistance.

Can speaker wire be too long?

It’s too long when you can hear the effect of using it! Longer cable will increase the resistance between amp and speaker, which will affect the amplifier’s damping factor causing the speaker to be less well controlled — so you’ll start to hear modulation distortions and a looser, slower bottom end.

Does speaker wire go bad with age?

The cable themselves will not go bad. Yes copper will oxidize and this can cause more resistance at the connection point. Clean the connection points off so you have nice clean fresh looking copper, or just strip back new exposed conductor and you will be just fine.

Are optical cables better than others?

The major difference is that HDMI cables can pass higher resolution audio which includes formats found on Blu-ray like Dolby TrueHD and DTS HD Master audio. Fiber optic cables won’t be able to transmit these high-res sound formats.

Is a subwoofer cable just an RCA cable?

you can use a standard RCA cable, but a subwoofer cable is suggested as it has more shield in it and provides more clarity and resolution. a subwoofer cable comes with a standard RCA connector but is thicker than the standard RCA cable. Any RCA cable will do. But go for a thicker cable for better signal transfer.

What gauge wire is best for speakers?

Thick wire (12 or 14 gauge) is recommended for long wire runs, high power applications, and low-impedance speakers (4 or 6 ohms). For relatively short runs (less than 50 feet) to 8 ohm speakers, 16 gauge wire will usually do just fine. It’s cost-effective and easy to work with.

How long can you run a subwoofer cable?

While you could connect a subwoofer to your receiver using a coaxial cable longer than 20 feet and not experience problems, an RCA cable run that long is susceptible to electromagnetic interference (EMI) — especially if it crosses household electrical wires.

Why is speaker wire so expensive?

Cables inherently have a little inductance and capacitance, but since the ultimate goal is to have all frequencies arrive at the speaker at the same time, more expensive cables go the extra mile and take these factors into account. – Conductor material. The purer the conductor, the more it costs.

How long can an audio cable be?

2.5mm, 3.5mm (also called headphone cables), and ¼” audio cables have a maximum distance of 150′ on average. Off-the-shelf, standard audio cables will be rated with 150′ in mind. It is possible to go further by custom-making something using thicker cable than usual.

Do subwoofer cables make a difference?

A subwoofer cable will enhance the sound quality on both passive and active subs, although many report seeing more noticeable differences with active subwoofers considering the signal strength required with a built-in amp.

Do RCA cables affect sound quality?

Only if they’re broken, or unusually susceptible to noise. Cables can do nothing to “increase” sound quality, but in some rare cases they can be designed so poorly that they pick up noise, or make poor connections.