Question: Are Speakon Cables Better?

What is a Speakon cable used for?

The Speakon (stylized speakON) is a trademarked name for an electrical connector, originally manufactured by Neutrik, mostly used in professional audio systems for connecting loudspeakers to amplifiers.

Other manufacturers make compatible products, often under the name “speaker twist connector”..

Can you plug a jack into a Speakon?

Hi, Your mixer outputs are generally 1/4″ (or XLR) jacks. Do you have a mixer with speakon outs? … You can however plug a 1/4″ plug into a Neutrik Speakon/1/4″ combo jack.

How long can a SpeakON cable be?

Re: Speakon cable length limits should be fine at max 50′ and at less than 1000watts. Shorter the run the better, although you might not ever notice the difference. By the way, sometimes you can buy a 100′ cable, cut it to length and put ends on yourself for less money than 2 50s.

Is XLR or 1/4 better?

4 Answers. The 3-pin XLR connector has two advantages over a 1/4″ connector. It provides balanced audio, which means that the cable is protected against electrical interferences from mobile phones or other devices. The longer the cable the more this can be an issue, if you don’t use XLR cables.

Should I use balanced or unbalanced cables?

If your connections both in an out are balanced, always try to use a balanced cable. … If you’re running longer distances a balanced cable is also the preferred option as the signal will be stronger than unbalanced. This means a higher signal to noise ratio. In other words, your audio will be cleaner.

Do Speakon cables sound better?

No difference. They are more secure and are a better system for safety, etc., but no tone difference from a good, low guage standard 1/4″ plug. I guess, technically, they do provide a little better power transfer, so if you are using huge power amps, it might make a slight difference.

Are microphone and speaker cables the same?

The difference between XLR “microphone cables” and XLR “speaker cables” is the wire gauge. … Higher gauge (thinner) cables can be used for microphones and instruments, any thing running at mic or line level. Granted, you can use a speaker cable as a mic cable, it isn’t cost effective.

Do balanced cables sound better?

Tech specs. Aside from these exceptions, balanced cables are a huge improvement over unbalanced. They have better signal-to-noise ratio, much lower impedance signals, and almost no external noise or distortion.

What does the XLR stand for?

External Line ReturnXLR stands for “External Line Return”. XLR connectors were invented as a means of passing large electrical currents cleanly, while providing a standardized connector for most types of audio devices, such as speakers, mixing boards, amplifiers, microphones, and other recording equipment.

What is the difference between Speakon and XLR?

So far as making your own cables go, the advantage of Speakon is that the strain relief is built for the high gauge cable, whereas XLR is built for mic cables. For home audio, though, it’s probably overkill, unless you have a particularly brutal living room.