Question: What DB Should You Mix At?

What dB should music be?

Experts recommend keeping sound levels at somewhere between 60 and 85 decibels to minimize the damage your ears are exposed to.

If you are listening to music at around 100 decibels, restrict your usage to within 15 mins..

What dB should Bass be at?

Typically, without tons of compression the kick and bass and vocals should be hitting very close to 0dbFS. The snare about -3 to -6dbFS.

What dB should 808 be?

How much should 808 stand out in mix as db? I usualy set my kick to hit around -10 or -9db. I found somewhere that 808 shoud hit at the same as kick or 5db lower. Listen and set it how loud you want it to the kick, bass and the rest of the mix.

What is LUFS in dB?

The LUFS meter (Loudness Unit Full Scale) measures the perceived loudness of audio material. … LUFS is a newer standard for measuring loudness and is considered as the most accurate. In practical applications, LUs are equal to decibels. Amplifying audio by 2dB is the same as raising its volume by 2 Loudness Units.

How loud do audiophiles listen to music?

Audiophiles should have an SPL meter or an app for their phone to roughly determine what noise exposure they are currently experiencing, and attempt to average it no higher than 85dB.

What should my true peak be?

Most True Peak meters use 4x oversampling, which has a potential error margin of 0.6dB, so the ITU has ruled that the maximum acceptable True Peak measurement should be no higher than -1dBTP.

Are LUFS and RMS the same?

The new standard for measuring audio loudness is LUFS (loudness units relative to full scale). … RMS tells you the the average power of the signal, but LUFS integrated loudness is more accurate in terms of our perception of loudness. The integrated loudness can be understood as the “overall” level of your audio.

At what volume should I mix?

A good rule of thumb is that your volume level should be low enough to allow for conversation without raising your voice. If you need to shout to be heard, your monitors are too loud.

What dB should my master be?

You’re safe somewhere around -0,5 – -3 dB, depending on the quality of your limiters and such, but many experienced forumites think -3- -6 dB is better. It’s not the peaks and the limiter that are essential, though, it’s how you use compressors.

What is the 3dB rule?

3dB rule when measuring noise at work When you measure noise levels with a noise meter, you measure the intensity of noise in units called decibels, expressed as dB(A). … It is based on orders of magnitude, rather than a standard linear scale, so each mark on the decibel scale is the previous mark multiplied by a value.

What is a comfortable dB level?

Quiet office: 50 to 60 (Comfortable hearing levels are less than 60 decibels.) Average city traffic, garbage disposal: 80 (Constant exposure may cause hearing damage.)

Where should my master peak?

A good rule of thumb is to keep steady signals such as rhythm guitars, synths or pads at somewhere between -20 and -16 dBFS, with transient peaks (such as occur from drums and percussive instruments) no higher than -6 dBFS.

Is LUFS louder than LUFS?

Even though the -14 LUFS version is technically quieter than the -6 version, it’s actually going to be perceived as sounding louder than the -6 one because the dynamics are preserved. … Once a stereo track of your final mix is complete, put a LUFS meter plugin onto the master bus and adjust the loudness where needed.