Question: What Volume Should I Mix At?

What volume should I master at?

Safest peak value is -1.4dB to avoid any chance of ever having intrasample clipping.

But, it really does not matter as long as you stay below zero.

It really matter very little if you raise to max at mixdown or at the beginning of mastering, since the mastering starts from trim..

How loud should your 808 be?

Instead of dressing up an 808 with half-a-dozen signal processors, just try making it louder than the other instruments. Start with all your faders down. Bring up the 808 so it’s at a reasonable level in your DAW (probably somewhere around -18 dBFS). Then, bring in all of the other instruments around it.

What should my true peak be?

Most True Peak meters use 4x oversampling, which has a potential error margin of 0.6dB, so the ITU has ruled that the maximum acceptable True Peak measurement should be no higher than -1dBTP.

Should I use 16 bit or 24 bit?

16 bit is plenty since it provides almost 100db of range when most music has 20-70db of dynamic range. We record with 24 bit because we dont know the dynamic range before it is recorded and there is very little penalty for doing so.

How loud should my beat be?

So, about how loud should a beat be to sell? … Now, for the customer, when an artist records on a beat, its very hard to do that when the beat is maxed out to 0db. Always give your artists headroom for their mixing, so for me i usually keep my client copies at around -5 / -6 dB to allow enough headroom.

Why is mixing on headphones bad?

This phenomenon is called crossfeed. It means that a small amount of sound from the left and right speakers will mix together and make the stereo image seem a little narrower. This is what leads engineers to claim that mixing on headphones gives your tracks an unrealistic feel.

Should I mix with speakers or headphones?

In general, mixing on studio monitors is always preferable. That doesn’t mean that good work hasn’t ever been done on headphones, but it just isn’t all that common. Headphone mixes often lack depth and wind up being very in-your-face and loud.

Can I mix and master with headphones?

Yes, as long as you understand the issues with using headphones for mixing and mastering it lets you work on your music in a variety of settings. First of all it’s important to point out that mixing and mastering are two different things.

What dB should my mix be before mastering?

I recommend mixing at -23 dB LUFS, or having your peaks be between -18dB and -3dB. This will allow the mastering engineer the opportunity to process your song, without having to resort to turning it down.

What is LUFS in dB?

The LUFS meter (Loudness Unit Full Scale) measures the perceived loudness of audio material. … LUFS is a newer standard for measuring loudness and is considered as the most accurate. In practical applications, LUs are equal to decibels. Amplifying audio by 2dB is the same as raising its volume by 2 Loudness Units.

What dB should kick be at?

Re: Recommended -dB of bass in relation to kick I would recommend you average your levels around -18db or so and after that, while mixing, set your levels in relation to each other rather than the meter per se.

What is the standard volume for a song?

A fairly standard unmastered mix in most pop genres will be about -24 to -20dBRMS with a crest of anywhere between 18 and 20dB. Post-mastered, unfortunately, you’re looking at around -12dBRMS or louder.

Is Spotify 16 or 24 bit?

Apple Music, Spotify, TIDAL and other online stores/streaming services – 16-bit/44.1k WAV files.

What volume should I mix at with headphones?

Here at Sweetwater, we talk frequently about mixing at safe volume levels (the sweet spot is around 70dB–85dB). This is important no matter how you’re listening to your mix, but with headphones it’s absolutely vital — after all, there are drivers situated less than an inch from your ears!

Should Beat be louder than vocals?

Should Vocals be Louder than the beat? No and Yes! Well it depends on the genre and style you are mixing or what the song calls for. What you don’t want is a vocal poking out like a sore thumb in your song.

Which is better 24 bit or 16 bit?

Audio resolution, measured in bits Similarly, 24-bit audio can record 16,777,216 discreet values for loudness levels (or a dynamic range of 144 dB), versus 16-bit audio which can represent 65,536 discrete values for the loudness levels (or a dynamic range of 96 dB).

Is 192KHz better than 96KHz?

The more bits and/or the higher the sampling rate used in quantization, the higher the theoretical resolution. … This means 20-bit 96KHz recordings have roughly 33 times the resolution of a 16-bit 44.1KHz recording and a 24-bit 192KHz recording has roughly 256 time the resolution of a 16-bit 44.1KHz recording.