Quick Answer: How Long Can You Run A Subwoofer Cable?

Is Thicker wire better for speakers?

Thicker wire presents less resistance to current flow.

Thick wire (12 or 14 gauge) is recommended for long wire runs, high power applications, and low-impedance speakers (4 or 6 ohms).

For relatively short runs (less than 50 feet) to 8 ohm speakers, 16 gauge wire will usually do just fine..

Do cables really make a difference?

Cables make a difference, but it’s a smaller difference than upgrading speakers, electronics, or turntable systems. If you already have a really good system, cables are the next logical upgrade step. The Cable Company also has a headphone lending library, for headphones that sell for more than $600.

Can I use speaker cable for subwoofer?

If you are using your subwoofer with a stereo receiver that lacks a subwoofer output (and many of them do), you can connect the subwoofer using an extra set of speaker cables, as shown above—provided the subwoofer has speaker-level (speaker wire) connections, as the picks in our Best Budget Subwoofer guide do.

Do you need a special cable for a subwoofer?

Most subwoofers are capable of working with an RCA connection, but some subwoofer cables offer higher shielding to reduce AC hum and create a more clear sound. Investing in high-quality cables is essential and a subwoofer cable would provide better sound quality as compared to an RCA cable.

Are expensive subwoofers worth it?

More expensive subs aren’t just all about bigger and louder, although frequently they are. They are also about having more refinement and greater accuracy. In a smaller room that you don’t intend to play loud I personally think you’d be far better served with a sealed subwoofer.

Does length of subwoofer cable matter?

The length of the cables makes no difference for speakers or subwoofers. … The short version is electrical signals travel too fast through cables to make an audible difference, but the distance from the speakers and subs to your ears might make a difference if they are too widely spaced.

Does cable length affect sound quality?

Due to the additional signal losses longer runs impose, the better the cable is at “protecting” the signal, the better will be the sound. … a shorter length of the same cable, in most cases, the 1.5M cable sounded a bit better the shorter cable.

Can you turn a subwoofer on and off?

no you do not. the sub woofer turns on and off depending on the unit you connect it to. if the power is on on your reciever then the speaker will come on.

Is it OK to extend speaker wire?

Does the extension cable need to be the same length on each speaker? No, you can have any combination of lengths, really. There could be a slight change in volume from one speaker to another because there is a power loss from a extremely long cable, but it’s unlikely.

Is it OK to leave subwoofer on all the time?

It’s fine to leave in on all the time with respect to the lifespan of the product, but keep in mind the amp may be drawing 30 to 50 watts then. I have a Polk sub that even on standby it draws 30 watts. With 30 watts of consumption at 12 cents per kilowatt hour, it will cost you $31 a year to leave that on 24/7/365.

Is a subwoofer cable just an RCA cable?

you can use a standard RCA cable, but a subwoofer cable is suggested as it has more shield in it and provides more clarity and resolution. a subwoofer cable comes with a standard RCA connector but is thicker than the standard RCA cable. Any RCA cable will do. But go for a thicker cable for better signal transfer.

Can I use a coaxial cable for a subwoofer?

Yes. You can use the Coax digital cable for a subwoofer connection without problem. However, things may not be entirely interchangeable. Digital coax cables and all video cables have a standard impedance of 75 ohms.

What kind of cable do I need for a subwoofer?

Regardless of what type of connection is available, be it RCA or direct wired, it is highly recommended to use shielded, heavy gauge cabling specifically designed for subwoofers. Such cables provide a cleaner, more noise-free audio signal. The image below shows two subwoofer outputs.

Does a subwoofer only play bass?

A subwoofer only plays bass. This is because of the size and construction. They are specifically designed to play the low frequency music.

Why my subwoofer is not working?

Ensure the power cord of the subwoofer is connected to a working AC outlet. … Ensure the speaker settings on the stereo system or TV have been configured properly to use the subwoofer. IMPORTANT: Certain speaker settings may disable the subwoofer. Trying a different speaker setting may resolve the issue.

How long can a 3.5 mm cable be?

2.5mm, 3.5mm (also called headphone cables), and ¼” audio cables have a maximum distance of 150′ on average. Off-the-shelf, standard audio cables will be rated with 150′ in mind. It is possible to go further by custom-making something using thicker cable than usual.

Does a good subwoofer cable make a difference?

A subwoofer cable will enhance the sound quality on both passive and active subs, although many report seeing more noticeable differences with active subwoofers considering the signal strength required with a built-in amp.

How do I connect my subwoofer to left and right input?

To connect a subwoofer to its receiver, you can use an LFE input cable or an RCA line-in cable (used for left and right input options). Assuming your subwoofer has the option to use an LFE input, this will be your best choice. But, if not, then an RCA input option will work.