- What is PCM on TV sound?
- Which is better Dolby or DTS?
- Do audio cables matter?
- Does cable length affect sound quality?
- Do cables make a difference in audio?
- How do I choose an audio cable?
- What does XLR stand for?
- Does HDMI carry audio?
- Is HDMI or optical cable better for sound?
- Can I use Mic cable for speakers?
- Do banana plugs affect sound quality?
- Can I use 18 gauge wire for speakers?
- Is PCM Dolby Digital?
- Does YouTube have 5.1 audio?
- What is Spdif audio out?
- Is thicker speaker wire better?
- What cable gives best sound quality?
- Which audio cable is the most used professionally?
- What’s better PCM or Dolby Digital?
- Do Speakon cables sound better?
- Why are audio cables so expensive?
What is PCM on TV sound?
PCM: This stands for “pulse-code modulation.” Use this setting if the external device you’ve connected to the HDMI port has already processed the sound, and you just want it to come out of your TV’s speakers..
Which is better Dolby or DTS?
The devil is in the detail. Or, more accurately, the way that the two technologies encode audio. DTS is encoded at a higher bit rate and therefore is considered by some experts to be better quality. Others argue that Dolby Digital’s technology is more advanced, and produces better sound quality at a lower bit rate.
Do audio cables matter?
While it’s possible that some cables will alter the sound in minor ways (usually due to cable length), that’s not a good thing: it means that the cable is falling short somewhere. By the design of all modern audio equipment, your cables should not affect your signal… assuming you have the proper connectors, gauge, etc.
Does cable length affect sound quality?
Due to the additional signal losses longer runs impose, the better the cable is at “protecting” the signal, the better will be the sound. … a shorter length of the same cable, in most cases, the 1.5M cable sounded a bit better the shorter cable.
Do cables make a difference in audio?
Cables make a difference, but it’s a smaller difference than upgrading speakers, electronics, or turntable systems. If you already have a really good system, cables are the next logical upgrade step.
How do I choose an audio cable?
Thick wire (12 or 14 gauge) is recommended for long wire runs, high power applications, and low-impedance speakers (4 or 6 ohms). For relatively short runs (less than 50 feet) to 8 ohm speakers, 16 gauge wire will usually do just fine. It’s cost-effective and easy to work with.
What does XLR stand for?
External Line ReturnXLR stands for “External Line Return”. XLR connectors were invented as a means of passing large electrical currents cleanly, while providing a standardized connector for most types of audio devices, such as speakers, mixing boards, amplifiers, microphones, and other recording equipment.
Does HDMI carry audio?
Audio Quality : HDMI is renowned for its video quality, but it also can carry audio without the need for multiple cables. HDMI supports Dolby TrueHD and DTS-HD for 7.1-channel sound for loss-less, theatre-quality audio. HDMI 1.4 also supports audio return channel, which sends sound from your TV tuner to your receiver.
Is HDMI or optical cable better for sound?
There is no difference when it comes to passing multi-channel audio like Dolby digital. The major difference is that HDMI cables can pass higher resolution audio which includes formats found on Blu-ray like Dolby TrueHD and DTS HD Master audio. Fiber optic cables won’t be able to transmit these high-res sound formats.
Can I use Mic cable for speakers?
You can use microphone cables for speakers and create what you would call a noiseless, balanced connection between the audio source and the speaker. The speaker you connect through an XLR connector has to be active (powered) or small enough for a regular cable to be able to handle the voltage of the amplified signal.
Do banana plugs affect sound quality?
Not only do they help your installation to look cleaner, banana plugs also give you a permanent and high quality connection. Often bare speaker wire connections are unreliable. Wires tend to get pulled out or frizzy as time passes, which can affect your sound quality.
Can I use 18 gauge wire for speakers?
All speakers work best with the largest gauge wire possible, 18 being the “standard”. … The manual states that up to 20 ft an 18 gauge wire is fine with 16 and 14 gauge for longer runs.
Is PCM Dolby Digital?
Pulse-Code Modulation (PCM) and the Dolby Digital® technology refer to different types of digital audio recordings. PCM is the conventional method for converting analog audio into digital audio. … Dolby Digital® technology uses a 5.1 or six channel format.
Does YouTube have 5.1 audio?
YouTube doesn’t currently support 5.1 playback. If you upload a 5.1 audio track it gets converted to stereo. The two major platforms that YouTube video players use are Adobe Flash, and Adobe Air. Flash 11 only supports 2 channel audio.
What is Spdif audio out?
S/PDIF (Sony/Philips Digital Interface) is a type of digital audio interconnect used in consumer audio equipment to output audio over reasonably short distances. The signal is transmitted over either a coaxial cable with RCA connectors or a fiber optic cable with TOSLINK connectors.
Is thicker speaker wire better?
Thicker wires are better: It’s true that for long runs, thicker wires are better at reducing the effects of resistance. But for most set ups (those with speakers within 100 ft of the amplifier), 16-gauge lamp cord is fine. For speakers 100 to 200 ft. … And from 200 to 400 ft., they recommend 12-gauge wires.
What cable gives best sound quality?
HDMIBoth HDMI and optical cables are excellent in transmitting digital audio from one device to another, and there’s no difference in the quality of sound that they can produce when using multi-channel audio like Dolby digital. But when it comes to higher resolution audio, HDMI is, clearly, a better option.
Which audio cable is the most used professionally?
TRSWhile TRS cables don’t have to be a specific size, the 1/4″ jack size is most common for pro audio applications. The ubiquitous 1/8”, or “minjack” cable is another type of TRS cable. It’s used to connect audio components to computers, digital recorders, or portable audio devices.
What’s better PCM or Dolby Digital?
Distinguished Member. Dolby Digital is compressed so PCM is better. Dolby True HD, DTS HD MA, Atmos and DTS X are also lossless, so should be similar quality to PCM. If the source audio is stereo, it should only be coming from your front left and right speakers unless you use an up mixer.
Do Speakon cables sound better?
No difference. They are more secure and are a better system for safety, etc., but no tone difference from a good, low guage standard 1/4″ plug. I guess, technically, they do provide a little better power transfer, so if you are using huge power amps, it might make a slight difference.
Why are audio cables so expensive?
Cables inherently have a little inductance and capacitance, but since the ultimate goal is to have all frequencies arrive at the speaker at the same time, more expensive cables go the extra mile and take these factors into account. – Conductor material. The purer the conductor, the more it costs.