What Gain Should You Record At?

Is gain the same as distortion?

The gain unit would focus on increasing the size of your guitar signal as much as possible without changing its tone.

The distortion pedal would focus on changing the sound as much as possible with little regard for the original signal..

What happens if the gain is too high?

When it’s turned up too high, the other person sounds distorted and is difficult to comprehend. … Amp gains work the same way – too low, and the background noise, or “hiss” takes over Too high, and music becomes distorted even at a normal volume level.

What is gain staging in logic?

Put simply, Gain Staging is all about allowing Headroom in your mix, both on a track-by-track basis, but also in subsequent buses and, of course, the main stereo bus.

How much headroom should I leave for mastering?

Quick Answer. Headroom for Mastering is the amount of space (in dB) a mixing engineer will leave for a mastering engineer to properly process and alter an audio signal. Typically, leaving 3 – 6dB of headroom will be enough room for a mastering engineer to master a track.

What is proper gain staging?

Gain staging, or gain structuring, is the act of setting the gain for each amplification stage (gain stage) in a sound system to achieve a target system volume that minimizes noise and distortion. Said another way, proper gain staging allows your sound system to achieve the best signal-to-noise ratio.

Is gain and volume the same?

So remember: gain and volume are very similar concepts, but their difference is very important to your mix. Volume is how loud the OUTPUT of the channel or amp is. … Gain is how loud the INPUT of the channel or amp is. It controls tone, not loudness.

Do speakers sound better with more power?

More power may help in large rooms or with low efficiency speakers or it could be a waste. Up to a point louder sounds better and more powerful amps can avoid clipping, which is a very gross form of distortion and can damage speakers.

How loud should a voice over be?

For the most part, your ideal audio level is between -10db to -20db. Your audio should peak around -6db. Never go above 0db, as your audio will distort or “clip.”

Does gain affect sound quality?

To recap, volume is a control of the loudness at the output of a sound system and has no affect on quality, while gain lets you increase the loudness inside of an audio system, which absolutely determines the quality of the sound or recording.

Does gain increase volume?

Gain can be thought of as the input volume to the preamp stage (gain adjustments can produce changes in overall volume, which might account for some of the confusion between the terms), although it’s more of a tone control than a volume control.

Does preamp increase volume?

Yes, an active preamp is an line level amplifier. You will get a lot more gain from it than just the standard componant line level. … Think of the preamp volume control as the throttle for an engine. Changing the throttle won’t change the amount of power available.

Should I gain stage?

Usually that’s okay because it’s a digital only signal- so there’s no inherent noise in there. There are times when, unfortunately, there is a lot of noise. You start amplifying the tracks so it’s actually loud enough to be able to use, you bring up the gain, but you’re also bringing up a huge amount of noise.

How high should gain be on mic?

We need gain to boost these mic level signals up to line level so that they are compatible with other professional audio equipment. From our general nominal values noted above, a 44 dB to 64 dB gain boost would do the trick.

What level should I record guitar at?

Bit depth is what counts most here, and recording at 24 bit gives you a lot of headroom to play with. I generally go for record meters peaking at around -12 to -10 db. Thanks – a blatant “wanting to help” moment that mixed up bit depth and frequency! It’s usually recommended that you record around -18 db.