What Is A Speakon Connector Used For?

How does a SpeakON connector work?

Speakon connectors arrange their contacts in two concentric rings, with the inner contacts named +1, +2, etc.

and the outer contacts connectors (in the four-pole and eight-pole version only).

named −1, −2, etc.

The phase convention is that positive voltage on the + contact causes air to be pushed away from the speaker..

Are optical cables better than others?

The major difference is that HDMI cables can pass higher resolution audio which includes formats found on Blu-ray like Dolby TrueHD and DTS HD Master audio. Fiber optic cables won’t be able to transmit these high-res sound formats.

What is a Neutrik connector?

Neutrik is a Liechtenstein company which manufactures connectors which are used in audio and video recording studios and concert sound systems. Its product range includes XLR-type connectors, speakON connectors, powerCON connectors, patch bays, BNC connectors and special connectors for industrial applications.

Do Speakon cables sound better?

No difference. They are more secure and are a better system for safety, etc., but no tone difference from a good, low guage standard 1/4″ plug. I guess, technically, they do provide a little better power transfer, so if you are using huge power amps, it might make a slight difference.

What does the XLR stand for?

External Line ReturnXLR stands for “External Line Return”. XLR connectors were invented as a means of passing large electrical currents cleanly, while providing a standardized connector for most types of audio devices, such as speakers, mixing boards, amplifiers, microphones, and other recording equipment.

Is XLR or 1/4 better?

4 Answers. The 3-pin XLR connector has two advantages over a 1/4″ connector. It provides balanced audio, which means that the cable is protected against electrical interferences from mobile phones or other devices. The longer the cable the more this can be an issue, if you don’t use XLR cables.

What are XLR outputs?

The XLR connector is a type of electrical connector primarily found on professional audio, video, and stage lighting equipment. … They are most commonly associated with balanced audio interconnection, including AES3 digital audio, but are also used for lighting control, low-voltage power supplies, and other applications.

What is the difference between Speakon and XLR?

So far as making your own cables go, the advantage of Speakon is that the strain relief is built for the high gauge cable, whereas XLR is built for mic cables. For home audio, though, it’s probably overkill, unless you have a particularly brutal living room.

Is Thicker wire better for speakers?

Thicker wire presents less resistance to current flow. … Thick wire (12 or 14 gauge) is recommended for long wire runs, high power applications, and low-impedance speakers (4 or 6 ohms). For relatively short runs (less than 50 feet) to 8 ohm speakers, 16 gauge wire will usually do just fine.

Are microphone and speaker cables the same?

The difference between XLR “microphone cables” and XLR “speaker cables” is the wire gauge. … Higher gauge (thinner) cables can be used for microphones and instruments, any thing running at mic or line level. Granted, you can use a speaker cable as a mic cable, it isn’t cost effective.

Can you plug a jack into a Speakon?

Hi, Your mixer outputs are generally 1/4″ (or XLR) jacks. Do you have a mixer with speakon outs? … You can however plug a 1/4″ plug into a Neutrik Speakon/1/4″ combo jack.

How long can a Speakon cable be?

Re: Speakon cable length limits should be fine at max 50′ and at less than 1000watts. Shorter the run the better, although you might not ever notice the difference. By the way, sometimes you can buy a 100′ cable, cut it to length and put ends on yourself for less money than 2 50s.

Does cable length affect sound quality?

Due to the additional signal losses longer runs impose, the better the cable is at “protecting” the signal, the better will be the sound. … a shorter length of the same cable, in most cases, the 1.5M cable sounded a bit better the shorter cable.

What is microphone cable?

XLR cables have three pins and a circular connector. They are used to deliver balanced microphone and line-level signals over long distances, so an XLR cable can be simply thought of as a microphone cable. … This preserves the original audio signal, even over long distances and near other electronic devices.