What Is The Difference Between Speakon And XLR?

What is a Speakon cable used for?

The Speakon (stylized speakON) is a trademarked name for an electrical connector, originally manufactured by Neutrik, mostly used in professional audio systems for connecting loudspeakers to amplifiers.

Other manufacturers make compatible products, often under the name “speaker twist connector”..

Are Speakon cables better?

SpeakOn Cables are also safer. With 1/4″ jacks, the contacts are exposed which means they can cause shorts or even electrocute a very unlucky sound guy who grabs the wrong spot on the cable.

What does XLR connector mean?

External Line ReturnAn XLR connector is a type of electrical connector primarily used in professional audio/visual and stage lighting equipment. XLR stands for “External Line Return”.

Is XLR stereo or mono?

Four-pin XLR connectors are used in a variety of applications. They are the standard connector for intercom headsets, such as systems made by ClearCom and Telex. Two pins are used for the mono headphone signal and two pins for the unbalanced microphone signal.

Does XLR sound better than RCA?

It’s very easy to assume that if your equipment has both XLR and RCA connections, that XLR connections are going to be the better sounding connection. … Our experience is that there are systems where the XLR connection sounds better than the RCA connection, and there are systems where the opposite is true.

Why is it called XLR?

The XLR name comes from a particular X connector from Cannon Electric, which was modified with a latch (the L) and a synthetic rubber compound (the R).

Can you plug a jack into a Speakon?

Hi, Your mixer outputs are generally 1/4″ (or XLR) jacks. Do you have a mixer with speakon outs? … You can however plug a 1/4″ plug into a Neutrik Speakon/1/4″ combo jack.

Are SpeakON cables balanced?

Common Cable Connectors Explained. In the audio world, there are six common cable connectors you’ll come across frequently: TRS and XLR for balanced connections and TS, RCA, SpeakON, and banana plugs for unbalanced connections.

Should I use balanced or unbalanced cables?

If your connections both in an out are balanced, always try to use a balanced cable. … If you’re running longer distances a balanced cable is also the preferred option as the signal will be stronger than unbalanced. This means a higher signal to noise ratio. In other words, your audio will be cleaner.

Are microphone and speaker cables the same?

The difference between XLR “microphone cables” and XLR “speaker cables” is the wire gauge. … Higher gauge (thinner) cables can be used for microphones and instruments, any thing running at mic or line level. Granted, you can use a speaker cable as a mic cable, it isn’t cost effective.

How long can a Speakon cable be?

Re: Speakon cable length limits should be fine at max 50′ and at less than 1000watts. Shorter the run the better, although you might not ever notice the difference. By the way, sometimes you can buy a 100′ cable, cut it to length and put ends on yourself for less money than 2 50s.

Why are XLR cables better?

They have a very low signal to noise ratio, so will often give you a much better sound, especially over longer cables. … Fully shielded, with minimal interference from the cable, the XLR will ensure that signal makes its way to the speakers unaffected.

Is XLR or 1/4 better?

4 Answers. The 3-pin XLR connector has two advantages over a 1/4″ connector. It provides balanced audio, which means that the cable is protected against electrical interferences from mobile phones or other devices. The longer the cable the more this can be an issue, if you don’t use XLR cables.

Is XLR better than Jack?

XLR typically gives you a ‘balanced’ connection, whereas the Jack connection is unbalanced. … For a high signal level instrument, like a guitar, this is often not a problem, but for a low level signal like a microphone it could significantly degrade the sound quality, so balanced connections are used.

Is XLR digital or analog?

XLR connectors allow you to transmit balanced mono signal, so two XLR cables are required if you wish to transmit a stereo analog signal. … The cable you use to connect your microphone to your microphone preamp is usually a female XLR to male XLR cable.

Is XLR a stereo?

A typical XLR connector has enough pins to carry a stereo signal. … This requires two conductors for the signal, plus the earth. Balanced signals reject interference better than unbalanced signals. So if you did want to use an XLR cable for stereo, then you would have to run unbalanced signals.

Do XLR cables carry power?

XLR cables can carry phantom power which is used to power condenser microphones and other equipment. The most common type of XLR cable has 3 pins. Pins 2 and 3, which are the ones that carry the audio signal, can also carry the phantom power voltage.